Service And Maintenance; Stainless Steel; Nozzle Adjustment - Speck Badu Jet IMPERIAL Manual De Instalación

4

Service and Maintenance

Stainless Steel

Stainless Steel can provide an outstanding combination of aesthetic appeal, corrosion resistance, strength, durability, and
cleanability, and they are commonly used for a wide range of indoor and outdoor pool applications, including ladders, handrails,
diving platforms, and slide assemblies. These components are frequently still structurally sound and aesthetically pleasing
after more than 25 years of service.
The BaduJet Imperial is made from high grade 316L polished stainless steel, often referred to as marine grade. It is ideal for
immersed in pool applications or higher temperature pool and spa applications. The following are suggestions for maintaining
the BaduJet Imperial's stainless:
1. After installation and before filling of the pool, thoroughly clean all stainless parts.
2. Maintain pool water chemistry. Poor water chemistry control can damage any metal or lessen the life of the pool or
equipment.
3. Muriatic acid should not be used to clean concrete or tile near stainless steel. If Muriatic Acid comes in contact with
stainless steel, it should be washed o and neutralized immediately.
4. Carbon steel wool or wire brushes should never be used for cleaning stainless.
5. Super chlorination (Shocking) should only be performed when necessary. High levels of chlorination can be minimized or
eliminated through careful water management.
6. When shocking the pool, the pump should be maintained on its highest speed until chlorine levels return to normal.
7. If the pool level is dropped, and the swimjet is exposed to air, hose down surfaces with fresh clean water or wipe down
with fresh clean water using a sponge or lint free cloth. DO NOT use acid, oil based cleaners, or wax. Light staining may be
removed with a water-dampened cloth or with vinegar or ammonia cleaning solutions (e.g. window and surface cleaners).
8. Pool chemicals should never be added in or around the swimjet.
With proper maintenance, the BaduJet Imperial is designed for a lifetime of enjoyment.

Nozzle Adjustment

When setting the nozzles for basic swimming, it is recommended that you set the nozzles in such a way that each nozzle
intersects 4 feet away while breaking the surface at the same time. To help set the nozzles in position for best performance,
please follow these instructions:
1. Parts required:
Quantity 2 - 4' x 1.5" PVC Pipe
Quantity 2 - 1.5" MPT x 1.5"/1.25" Hose Adapter
Quantity 2 - Female Adapter 1.5" Slip x 1.5" FPT
2. Turn OFF the jet pump(s).
3. Insert each jet adjustment tool into jet nozzle.
4. Bring the ends of the adjustment tools together so they are touching in between the jet housings. Then raise the tools
together so the ends touch the water surface. (See Figure 25)
5. Remove jet adjustment tool.
21