PRO LIFTS VMB TL-054 Manual De Instrucciones página 10

C
B
A
Distance from the
load's center to the
lifting carriage
25 cm
A
(0.82')
30 cm
B
(0.98')
40 cm
C
(1.31')
50 cm
D
(1.64')
For large forks:
60 cm
E
(1.97')
from the handle of the winch will deform
the structure and apply a lateral force to
Security system ILS
The TL-054 / TL-056 incorporates the ILS
PRO LIFTS S.L.
Diagram 4.6.1
E
D
Maximum load
TL-054 TL-056
(485 lb) (441 lb)
(437 lb) (381 lb)
(364 lb) (287 lb)
(311 lb) (229 lb)
(271 lb) (190 lb)
Depósito legal y copyright 2014. Todos los derechos reservados.
ENGLISH
4.7 - Elevation:
lift the carriage. The unique SRS system
(Sequence Retainer System) will ensure
ter the other.
4.8 - Hold:
The tower can be left in any intermediate
position if it is necessary. Just stop turning
the handle of the winch and leave it. The
and hold the load.
4.9 - Lowering:
release the clutch of the winch. Then turn
4.10 - Transport:
For the transport of the tower is necessary
completely. Once the towerlift is comple-
tely folded, place the legs in their trans-
port compartment (S) and the lift will be
ready to be transported.
1
N ) to
-
1
) to
N
2
N ) until all pro-
10