LAVAZZA SMEG Instrucciones De Uso página 34

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
EN
I T
Moreover, you can pause the descaling process by
simply pressing the ESPRESSO
Pressing the same button will also enable you to restart
the descaling process.
The container used to collect the solution shall be
emptied during the pause times.
The end of the descaling phase will be indicated as
follows:
ESPRESSO steady orange light;
ESPRESSO LUNGO steady white light.
Remove the water tank, rinse and wash it accurately.
Fill it with drinking fresh non-carbonated water up to
the MAX level
MAINTENANCE AND CLEANING
button.
34
Fit the tank back into place on the machine, then
place a suitable container under the dispenser.
Press the ESPRESSO
rinsing phase.
During the rinsing phase, the ESPRESSO
button will blink to an orange light.
The rinsing operation will be carried out continu-
ously until an amount of 70 oz (2 litres) of water is
reached.
The tank will have to be filled several times.
If, during the rinsing phase, the tank is found to be
empty, the machine will show the following warn-
ing-lights:
ESPRESSO to a steady orange light;
ESPRESSO LUNGO
to a blinking white light.
Furthermore, you can pause the rinsing process by
simply pressing the ESPRESSO
At the end of the rinsing phase, the machine will go
back to the warming phase; after that, it will be ready
to supply.
button again to start the
button.

Publicidad

Tabla de contenido
loading

Tabla de contenido