Invacare Aquatec R Manual Del Usuario página 19

6. Fold the side flaps of the seat inwards.
IMPORTANT!
– Release both rear suction cups
simultaneously.
7. Release the rear suction cup A by pulling up on its tab
B.
8. Lift the rear of the seat further. This releases the front
suction cups.
IMPORTANT!
– If the height adapters have been installed
(optional), you also have to pull the tabs
of the front suction cups to release them.
9. Lift the seat out of the bathtub.
10. Carefully store all components of the bath lift.
1574470-D
Transport
19