Important; General Warranty Limitations - Scania DC16 XPI Manual Del Operador

11.
Miscellaneous items used in the above sys-
tem:
a)
Electronic control unit (ECU), sensors,
wiring harnesses.
b)
Hoses, belts, connectors, assemblies,
clamps, fittings tubing, sealing gaskets or
devices and mounting hardware.
c)
Pulleys, belts and idlers.
d)
Emission control information label.

IMPORTANT!

This list does not include all expendable mainte-
nance parts.
• Expendable emission related parts requiring
scheduled maintenance are warranted until
their first scheduled replacement point.
• Emission related parts scheduled for inspec-
tion and replacement only as necessary are
not considered expendable and if repaired or
replaced under warranty shall be warranted
for the remaining warranty period.
See Specific Warranty Exclusions below.

General warranty limitations

To retain the dependability of the exhaust emis-
sion control originally built into your Scania in-
dustrial diesel engine, it is essential that the
engine is installed according to Scania installa-
tion instructions and emission certificates. Your
engine is designed to operate on diesel fuel only.
Use of any other fuel may result in your engine
no longer operating in compliance with state or
federal emissions requirements. The use of alter-
native fuels shall not void the warranties on any
engine certified to use such fuel.
In addition, as the engine owner, You are respon-
sible for the performance of all scheduled main-
tenance listed in your owner's manual, and all
necessary repairs, on your new Scania industrial
diesel engine. Scania may deny a warranty claim
if the engine or part has failed due to abuse, ne-
glect, improper maintenance or unapproved
modifications.
OPM 300 es-ES
Garantía de los motores Scania para motores industriales
Receipts covering the performance of regular
maintenance should be retained in the event
questions arise concerning maintenance. The re-
ceipts should be transferred to each subsequent
owner of the engine with the emission warranted
engine. Scania cannot, however, deny warranty
solely for the lack of receipts or for your failure
to ensure the performance of all scheduled main-
tenance.
The Warranty covers the cost of diagnosis, repair
and replacement parts and services of warranted
components and systems performed by an au-
thorized Scania distributor or dealer using genu-
ine Scania parts. You may elect to have
maintenance, replacement or repair of these
components and systems performed by any re-
pair establishment or individual without invali-
dating the Warranty.
The use of other than Scania replacement parts
also does not invalidate the warranty on other
components unless such parts cause damage to
warranted parts. However, the cost of such ser-
vices or parts will not be covered by the Warran-
ty.
You are responsible for initiating the warranty
process. The California Air Resources Board
suggests that You present your heavy-duty off-
road engine to an authorized Scania dealer as
soon as a problem exists. The warranty repairs
should be completed by the dealer as expedi-
tiously as possible.
Use of replacement parts which are not of equiv-
alent quality may impair the effectiveness of
emission control systems. Accordingly, it is rec-
ommended that only Scania repair or replace-
ment parts be used for maintenance, repair or
replacement of emission control systems.
If other than Scania parts are used for mainte-
nance, repair or replacement, the owner should
obtain assurance that such parts are warranted by
their manufacturer to be equivalent to genuine
Scania parts.
6
©
Scania CV AB 2019, Sweden
WARNING!