Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk VHW310 Manual De Instrucciones

VHW310 - VHW311

Vacuum Cleaner Parts and Labels

1. Data plate which includes:
Code of the Model, Class, Technical Specifications
(see table on page 6), Serial N°, EC Mark, Year of
manufacture, Nominal network voltage.
2. Vacuum union hose
3. Manual motor starter (normal version, if equipped)
4. Filter chamber and dust container
5.
Outlet / exhaust
6. Attention plate
Draws the operator's attention to the fact that the main
filter must only be shaken when the vacuum cleaner
is turned OFF (see also "Shaking the primary filter"
paragraph).
7. Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate (if equipped).
8. Inlet
9. Vacuum gauge (if equipped)
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (8) and blows out through the outlet (5).
Before turning the vacuum cleaner on, fit the vacuum hose
into the inlet and then fit the required tool on the end of hose.
Refer to the manufacturer's accessory catalog or Service
Center. After the hose and tools have been fitted, make sure
that the motor turns correctly (air should not blow out from the
inlet).
This vacuum cleaner is equipped with an internal deflector
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container. The vacuum cleaner is equipped with a main filter
which enables it to be used for a variety of applications.

Optional kits

US
Please contact the manufacturer's sales network for
information on options.
Instructions for installing the option are included in the
conversion kit.
Use only supplied and authorized genuine spare parts.
C392

Vacuum cleaner description

Figure 1
WARNING!

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalog.
WARNING!
Use only genuine accessories supplied and authorized
by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
A
Model in.
(mm)
19.7
VHW310
(500)
19.7
VHW311
(500)

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight.
WARNING!
To lift the vacuum cleaner, use the handle attached to
the structure, DO NOT use the handles attached to the
container.
4
Figure 2
B C
lbs.
in. in.
(kg)
(mm) (mm)
35.4 46.7 135
(900) (1185) (61)
35.4 46.7 161
(900) (1185) (73)
01/2015