Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk S2 B Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

S2B/S3B

Vacuum Cleaner Parts and Labels

Identification plate which includes:

Code of the Model, Technical Specifications (see table

on page 6), Serial No., EC Mark, Year of manufacture,

Nominal network voltage.

Dust container

Dust container release lever

Inlet

Outlet

Attention plate

Draws the operator's attention to the fact that the filter

must only be shaken when the vacuum cleaner is turned

off (see also par. "Primary filter shaker").

Plug for connecting the vacuum cleaner to an electrical

socket.

This vacuum cleaner creates a strong air flow which is drawn

in through the inlet (4 - Fig. 1) and blown out through the

outlet (5 - Fig. 1).

Before turning on the vacuum cleaner, fit the vacuum hose

into the inlet and then fit the required tool on to the end part

(refer to the manufacturer's accessory catalogue or Service

Centre).

The diameters of the authorised hoses are given in the

technical specifications table.

The vacuum cleaner is equipped with a primary filter which

enables it to be used for the majority of applications.

Besides the primary filter, which retains the most common

types of dust, the vacuum cleaner can be fitted with a

secondary filter (absolute H class) with a higher filtering

capacity for fine dusts and dusts that are hazardous to health.

C352