Battery Tool Use And Care; Service; Chainsaw Safety Warnings - GreenWorks CSF403 Manual Del Operador

EN
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
Such preventive safety measures
power tools.
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
Many accidents are caused by poorly
before use.
maintained power tools.
• Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
Use of the power tool for operations
performed.
different from those intended could result in a
hazardous situation.
2.5

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the
manufacturer.
of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
battery packs.
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with plenty of soap and
water. If liquid contacts eyes, immediately seek
Liquid ejected from the battery may
medical help.
cause irritation or burns.
2.6

SERVICE

• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is
maintained.
Properly
A charger that is suitable for one type
Use of any other battery packs may
English
3 CHAINSAW SAFETY
WARNINGS
• Keep all parts of the body away from the saw chain
when the chainsaw is operating. Before you start the
chainsaw, make sure the saw chain is not in contact
with anything.
operating chainsaws may cause entanglement of
your clothing or body with the saw chain.
• Hold the power tool by insulated gripping surfaces
only, because the saw chain many contact hidden
wiring. Saw chains contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
• Always hold the chainsaw with your right hand at the
rear handle and your left hand at the front handle.
Holding the chainsaw with a reversed hand
configuration increases the risk of personal injury
and should never be done.
• Wear safety glasses and hearing protection. Further
protective product for head, hands, legs and feet is
recommended.
reduce personal injury from flying debris or
accidental contact with the saw chain.
• Do not operate a chainsaw in a tree.
chainsaw while up in a tree may result in personal
injury.
• Always keep proper footing and operate the
chainsaw only when standing on fixed, secure and
level surface.
ladders may cause loss of balance or control of the
chainsaw.
• When cutting a limb that is under tension, be alert of
spring back.
released, the spring loaded limb may strike the
operator and/or throw the chainsaw out of control.
• Use extreme caution when cutting brush and
The slender material may catch the saw
saplings.
chain and be whipped toward you or pull you off
balance.
• Carry the chainsaw by the front handle with the
chainsaw switched off and away from your body.
When transporting or storing the chainsaw, always
fit the guide bar cover.
chainsaw will reduce the likelihood of accidental
contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning
and changing accessories.
lubricated chain may either break or increase the
chance for kickback.
• Keep handles dry, clean, and free from oil and
Greasy, oily handles are slippery, causing
grease.
loss of control.
• Cut wood only. Do not use chainsaw for purposes
not intended. For example: do not use chainsaw for
This
cutting plastic, masonry or non-wood building
Use of the chainsaw for operations other
materials.
than intended could result in a hazardous situation.
6
A moment of inattention while
Adequate protective clothing will
Operation of a
Slippery or unstable surfaces such as
When the tension in the wood fibres is
Proper handling of the
Improperly tensioned or