Electrical Connection - IKOS MONO Manual Del Usuario

Electrical connection

The stove should be connected to a power supply of 230V AC (50Hz) with short-circuit and
overload protection.
EN
A cable type Schuko is supplied to connect the stove to the power supply.
The stove power plug has one fuse for protection.
Model I2.A03 Model I2.A02
Remove covers
To remove the covers and access the interior components, you should:
MONO
1. Open the pellet tank cover
2. Loosen the screws with a Philips Ph2 wrench
3. Remove the main lateral covers
4. Loosen the screws from the lateral cover ribs
5. Remove the lateral cover ribs
EN // 112
USER'S MANUAL