IKOS MONO Manual Del Usuario página 123

Maximum air flow
Er42 exceed
In case one of the error messages appears on the display it's important to identify and solve the
issue, except for errors that require technical assistance.
After the repair a reset error should be done in the stove. To do so press and hold down the P1 button
for 5 seconds.
In case the problem persists the alarm message will appear again in the display.
Filling the pellet tank
Check the level of pellets in the tank before turning on the stove and regularly during operation.
Fill the pellet tank before lighting the stove so that it won't be necessary to refuel during the
operation with the stove hot.
When refueling the tank during operation pay special attention so that no pellets fall
outside the reservoir under risk that they catch fire when in contact with hot surfaces.
The pellet tank is located under the top; to access, lift up the top as showed in the picture:
–
EN // 123
USER'S MANUAL
Make a reset to the alarm and
try new lighting, if the problem
remains call assistance.
EN