CLEANING AND SUPPORT
General notes
Regular cleaning and maintenance is essential for the good machine operation.
If the cleaning tasks are not made regularly it may accumulate dirt and it can cause lighting
fail and loss of efficiency and therefore more pellet consumption. Other consequence is the
increase of temperatures inside the stove and the exhaust gases temperatures leading to
greater wear and damage of the components.
This is why IKOS proposes a cleaning plan to be executed by the owner (daily, weekly and
monthly) and an annual maintenance (normally before the new cold season) and executed by
specialized technician.
Any cleaning or maintenance task should be performed with the equipment turned off
and completely cold.
The cleaning of the cover surfaces of the stove should be made with the equipment
completely cold, use only a humid and soft cloth.
Disconnect the stove from the socket before carrying out any operation.
Daily cleaning
The daily cleaning task consists of the following components:
•
Burner
•
Interior glass door
•
Ash drawer
To access this components, the user should open the door of the furnace, first open the outer
door and then the furnace door unlocking the closure as shown in the pictures:
EN // 125
USER'S MANUAL
EN