Annual Maintenance - IKOS MONO Manual Del Usuario

Another cleaning tasks should be done in the retention particles box, just below the furnace.
To access this box just unscrew the two wing nuts bolts and remove the cover and vacuum all
the dust, as showed on the picture bellow.
EN

Annual maintenance

Before the winter/cold season a complete maintenance operation should be done to assure
the stove is in good conditions and ready to heat. Depending on the hours of use maintenance
might be necessary once or twice a year.
When the stove reaches 1200 hours of work time, a message will appear in the display warning
for the annual maintenance. The user can also ask for this operation after the consumption of
700 Kg of pellets. After maintenance done, the specialized technician should reset to zero the
working hours counter.
This maintenance is essential for keeping the factory warranty valid.
• Cleaning all the interior of the furnace and exhaust gases channels
• Cleaning areas of retention ashes
• Cleaning the exhaust gases temperature sensor
• Check and clean the combustion air intake sensor
• Cleaning the pellet tank
• Cleaning the door glass
• Check and cleaning the ventilators
• Check the sealing cord of the door rand replacement if necessary
• Check the door closure mechanism and adjust if necessary
• Check and clean the chimney if necessary
EN // 130
USER'S MANUAL