IKOS MONO Manual Del Usuario página 117

Advanced functions menu
To access the user menu with the advanced functions, press P3 and P4 buttons simultaneously
to have control over the following settings:
This menu allows to change the speed of the room ventilator. It is possible to
choose between speeds 1-2-3-4-5-A, where A is automatic and the speed is
Ventilation (Air)
chosen by the system. It's recommended that the speed is set to the A option
to prevent stove overheating.
This menu allows you to configure the stove to switch on/off automatically at
user-programmable times.
To configure the stove you will need to access two distinct submenus: Mode
(allows you to enable/disable the various modes of the equipment) and ProG
(allows you to program each mode individually).
Options of the Chrono Mode
Chrono (Cron)
The described modes can all be parameterized simultaneously in the next
point, but only one of them can be enable.
This is the submenu that enable/disable the desired mode. By default, the
Mode submenu is "OFF" when accessed by pressing the P3 button, to
change it press the P3 button again so that the display flashes. With P2 and
P4 buttons you can select the desired mode. To save the selection press P3
again so that the display is continuous.
To set the time intervals, you need to access the submenu described in the
next point. To do this, press P1 to go back and with P2 and P4 buttons select
the "ProG" submenu by pressing P3.
EN // 117
USER'S MANUAL
EN