Weekly cleaning
The weekly cleaning task consists of cleaning the following components:
•
Burner
EN
•
Interior glass door
•
Ash drawer
•
Surfaces of the burning chamber
To remove the burner to clean, just lift it up in vertical (as shown in the picture). Have in mind to
properly install the burner after removing it and that all the holes are clear and clean.
NOTE: Illustrative image (model I2.A03).
Vacuum all the ashes in the interior of the burner box (with the burner out).
Vacuum all the ashes accumulated in the ignitor tube.
Clean all the ashes accumulated in the walls of the burning chamber with the vacuum cleaner
and if necessary with the help of a soft brush (or other suitable accessory).
EN // 128
USER'S MANUAL