System Settings - Welby BDH 612 Manual Del Usuario

1. Open the battery compartment
2. To replace the batteries, remove the old batteries first. Insert 2 batteries (size AAA) in the battery
compartment.
3. Close the battery compartment by putting the battery compartment cover back on until it has securely
locked into place.

System settings

The system settings allow you to select users and set the date, time and time format.
1. Push the Start/Stop button
date will now be shown in alternation on the display
2. Push and hold the M1 button
up as shown in Fig. 1.
3. Push the M1 or M2 button
Stop button.
4. As soon as you have entered the year, the month indicator will automatically blink. To set the month, day
and time, please proceed as described in section 3.
5
by removing the battery compartment cover
8
to switch the blood pressure monitor on. The time and
9
, then push the Start/Stop button so that the year lights
7
to set the correct number and then confirm with the Start/
1
(see Fig. 1).
First use
21
(see Fig. C).
Fig. 1
29