– Remove feed chute and remove
shredder deposits from the housing
(Important: disconnect the power cable)
(
11.2)
– Reset locking device (
Fault:
Frequently tripped mains fuse
Possible cause:
– Unsuitable electric cable
– Power overload
– Machine overloaded
Remedy:
– Use suitable electric cable (
– Connect the machine to another circuit
– Reduce quantity of shredding material;
reverse, re-sharpen or replace the
shredding blades
(
Fault:
Reduced shredding performance
Possible cause:
– Blunt blades
Remedy:
– Reverse, re-sharpen or replace
shredding blades
(
40
19. Service schedule
11.4)
19.1 Handover confirmation
10.1)
11.5)
19.2 Service confirmation
11.5)
Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
Service performed on
Next service date
23
0478 201 9915 A - EN