HSM SECURIO AF 150 Instrucciones De Servicio página 16

Ocultar thumbs Ver también para SECURIO AF 150:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
english
5 Operation
Switching on the shredder
• Set mains switch at rear of paper shredder
to "I".
• Press the operation button.
 The "Ready for operation" indicator
lights up.
Shredding paper
You can shred paper by feeding it directly
into the opening or you can use the auto-
matic intake. Papers or CDs can be fed
manually during autofeed stack processing.
1. Feed the paper directly into the feed
opening
unit is switched off automatically and the
shredder switches to standby.
2. Feed the paper using the automatic
feed tray
The document shredder is equipped with
an automatic feeder which can hold up
to 150 sheets of paper. After starting the
cutting unit by switching on the permanent
mode or by feeding individual sheets
into the infeed slot, the sheets from the
automatic feed tray are drawn in one by
one. Once the shredding is finished, the
document shredder goes into standby mode
again.
16
When you feed paper,
the light barrier
automatically starts the
cutting unit.
 Two seconds after
the light barrier in the
paper feed opening is
free again, the cutting
SECURIO AF 150
WARNING
Risk of injury!
The intake rollers in the paper
cassette keep running during the
shredding process even if the lid
is open. Do not go near the
rollers with long hair, loose
clothing, ties, scarves, necklaces,
bracelets etc.
• Start the shredding process.
You have 2 options to do this:
a) Press the operating button
for 4 seconds.
This selects the permanent mode.
 The cutting unit and automatic feed drive
start. The paper is fed into the cutting unit.
2 minutes after shredding all the sheets
from the automatic feed tray, the drive
switches off and the document shredder
goes into standby mode.
Premature cancellation: Press the
operating button.
b) Feed one sheet of paper directly
into the infeed slot.
 The cutting unit and automatic feed drive
start. The paper is fed into the cutting unit.
2 minutes after shredding all the sheets
from the automatic feed tray, the drive
switches off and the document shredder
goes into standby mode.
Place the stack of
papers (max.
150 sheets, 80 g/m
the automatic feed tray.
NOTICE: The paper
may not have any paper
clips or staples
attached.
) in
2
02/2018

Publicidad

Tabla de contenido
loading

Tabla de contenido