List Of Appropriate Drives; Normal Operation; Operating The 2-Key Hand Switch - RK Rose+Krieger MultiControl mono Serie Instrucciones De Montaje

7. Life Phases

7.6 List of appropriate drives

There is a list of drives which can be connected to the controller in the table below.
Connection A (2-pin socket)
Multilift
LZ 60
Drive unit LZ
Alpha Colonne

7.7 Normal operation

7.7.1 Operating the 2-key hand switch

Using the UP button, the drives are traversed according to
the direction of travel selected. As long as the button is
pressed, traverse it in the direction of travel selected until the
end position is reached or you let go of the button.
By pressing the DOWN button, the drives can be traversed
according to the direction of travel selected. The same con-
ditions apply as for the upwards motion.
When using 2 columns, these are traversed at the same ti-
me, but not synchronously.
Ensure that nobody is in the vicinity of the drives when they are moving.
Therefore, only use the hand switch if you can see the drives - risk of accident!
In event of a possible malfunction, pull out the mains plug immediately and inform the specialist
staff (service).
38
Connection C (8-pin socket)
Slimlift
Slimlift EM
LZ 60
Drive unit LZ
Powerlift med.
Powerlift teleskop
Powerlift Spindel med.
Powerlift M med.
Alpha Colonne
DOWN
UP