Introduction - HEBU medical HBS x-touch 300 BiSeal Instrucciones Para El Uso

®
HBS x-touch 300 BiSeal

1. Introduction

An electrosurgical unit is a generator used to transform electronic energy into high-frequency
alternating current (HF current).
If this current flows through human tissue, it creates heat which is used for cutting and for coagulation
of the tissue.
The HBS x-touch 300 BiSeal
high safety standard and unites economy with operative flexibility.
It offers the following application modes:
For monopolar surgical use
•
Pure cut
•
Blend cut
•
Polypectomy mode
•
Cutting in water environment (TUR)
•
Soft coagulation
•
Forced coagulation
•
Spray coagulation
For bipolar use:
•
Blend cut
•
Coagulation
•
Vessel sealing, BiSeal
•
Bipolar Cutting in water environment (TUR)
Benefits of the HBS x-touch 300 BiSeal

Simple, intuitive and safe operation

USB-connection for service

Current terminal for optional wireless foot switch, max. 0.5 A

Display-supported neutral electrode safety system helps interactively when applying the neutral
electrode

Nine storage locations for individual program settings

Two monopolar multifunction terminals for 3-pin standard or Martin plug

AutoStop function for automatic interruption of the energy supply after a certain tissue resistance
level is reached.

Tone signal with scope for control of the volume, and an alarm tone in case of faults without facility
for switching off.

Coloured illumination of the LCD display in red, yellow, blue or green to indicate different operating
modes or error statuses

Facility for tracing output and impedance at the LCD display in the patient circuit on activation

Worldwide application possible through connection scope from 100 to 260 volts, 50 to 60 Hz

A successful sealing is confirmed visually and acoustically
®
is a versatile and compact electrosurgical unit which complies with a
®
®
:
EN
31