T-Link; Enabling Or Disabling T-Link; Using One-Touch Play; Using System Standby - JVC LT-40HW62U Manual Del Usuario

Note: The options you may choose depend on
picture, you can select SPDIF delay from
the Settings menu and press ◄/► to adjust
the delay time to synchronize the sound with
the picture.

T-Link

Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable one-touch
play and one-touch standby between CEC devices.

Enabling or disabling T-Link

1. Press MENU on the remote control, then select
Settings > T-Link.
2. Press ◄/► to select On or Off, if this function
is turned on, T-Link option will be available in
the Quick access menu which you can enter by
pressing the Option button on the remote control.

Using one-touch play

With one-touch play, pressing the play button on (for
example) your DVD remote control starts playback on
your DVD device and automatically switches your TV
to the correct source, displaying DVD content.

Using system standby

With system standby, pressing the O button on (for
example) your TV remote control switches your TV
and all connected HDMI devices to standby mode.
Note: The CEC functions depend on the devices
connected and it is possible that some
devices may not interoperate correctly when
connected to this TV. The user manual or
the manufacturer of the problematic devices
should be consulted for further information.

Network update

Press MENU on the remote control, then select
Settings > Network update. Select On/Off to enable
or disable the Network update function.
- When this function is on, the TV will automatically
update channels if your DTV service provider
updates their DTV network.
- When this function is off, you need to run the
channel search again to get new channels or
remove unavailable channels if your DTV service
provider adds or removes channels from their DTV
network.

Common interface

Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.

Using the common interface module

WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instructions described below. Wrong insertion of
a common interface module may damage both the
module and your TV.
1. Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.

Accessing common interface services

After inserting and activating the common interface
module, press MENU on the remote control and
select Settings > Common interface.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.

Software update

Note: Do not switch off or unplug the TV until the
upgrade is completed.
Press MENU on the remote control and select
Settings > Software update. Press OK/► to enter.
- By network: Enables you to download and install
the latest software version from the Internet.
Make sure to set up a wired or wireless network
connection first then select By network and press
OK/► to enter. When new-version software is
available, a progress bar appears. When the
download finishes, the TV will go black and upgrade
the software.
Note: Keep successful network connection during
upgrade.
- By channel: Enables you to install the latest version
of the software if available from the broadcast.
Use ▲/▼ to select By Channel and press OK/► to
enter.
• Use ◄/► to select Yes under Auto download
to automatically download the latest software
if available. After the software has been
downloaded successfully, you will be prompted
to decide if you want to install it right now. If yes,
follow the on-screen instructions to complete
your installation. You can also select to ignore
the installation here.
EN 12
Using more of your TV