Nuova Simonelli Aurelia II 2 GR S Libro De Instrucciones Para El Usuario página 64

CUP-WARMER PROG.
ON XX OFF xx
The message ON XX will begin to flash; use
the keys to change the
cup warmer open time (from 0 to 60 min.).
Press to confirm and pass to the
cup warmer OFF time (from 0 to 60 min.).
NOTE: Setting one of the two ON/OFF values to
0 will automatically bypass the function.
When the cup warmer is programmed, the
button will flash slowly.
Press the key to pass to the next
page.
Single Temperature
The display will read:
CUP-WARMER
SETPOINT xxx°C
66
Using the
ble to increase or reduce the temperature
within a certain range [40°C ÷ 80°C] /
[104°F ÷ 176°F].
Press to confirm and pass to the
next step; the display will read.
Press to return to the previous page
without confirming.
Double Temperature
The display will read:
CUP-WARMER
SETPOINT
Using the
ble to increase or reduce the temperature
no.1 within a certain range [40°C - 80°C] /
[104°F - 176°F].
Press to return to the previous page
without confirming.
Press to confirm and pass to the
next step; the display will read:
CUP-WARMER
SETPOINT xxx°C
Using the
ble to increase or reduce the temperature
no.2 within a certain range [40°C ÷ 80°C] /
[104°F ÷ 176°F].
Press to confirm and pass to the
next step; the display will read:
Press to return to the previous page
without confirming.
DATE/TIME PROGRAMMING
The display will read:
DATE/HOUR
By pressing the
keys, it is possi-
read for example:
The times will start to flash on and off.
Vary the hours and the minutes by using
the
Confirm by pressing the
Once the hours and the minutes have been
™
varied press
xx°C
day, the month and the year by using the
same procedure as described above.
keys, it is possi-
On completion press
next page.
DISPLAY (AND DELIVERY TIME)
SETTING (T3 version only)
On the main menu, it is possible to see the
temperatures of the units on the machine. The
¡
temperatures are given in both in °C and °F.
The first line shows the temperatures for units 1
and 3, while the second line shows the tempera-
keys, it is possi-
tures of units 2 and 4 or just the temperature for
unit 2, if there are just 3 units on the machine.
The function is opened by pressing the
key and the display will read "TEMP. DISPLAY".
Using the
select "ACTIVE" or "NOT ACTIVE". The
and
ing cases:
If "ACTIVE" is selected, this returns to the
main menu.
If "NOT ACTIVE" is selected, this opens the
"DELIVERY TIME" function (described here
below).
The display will read:
key, the display will
MONDAY 08:22
08 MAY 2003
keys.
key.
again and vary the
to go on to the
keys it is possible to
keys serve to confirm in the follow-