Setting The Amount Of Lens Shifting - JVC D-ILA DLA-G150CLE Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Setting the Amount of Lens Shifting

When the lens unit (optional) with the lens shifting function is used, the projected screen can be shifted up and down in
position.
Notes
• The amount of shifting is within the range of approx. 30% to 55%.
• After finishing the lens shift setting, tighten the SHIFT LOCK fixing bolt firmly so that the lens will not move.
1
Turn the cap on the top of the projector to open it.
2
Loosen the SHIFT LOCK fixing bolt.
Use the hex. wrench supplied.
3
Rotate the LENS SHIFT knob to adjust the position (shift amount) of the projected
screen.
Rotate it to the right: The lens shifts upward.
Rotate it to the left:
The lens shifts downward.
4
Tighten the SHIFT LOCK fixing bolt firmly.
Use the hex. wrench supplied.
5
Turn the cap to close it.
SHIFT LOCK fixing bolt
LENS SHIFT knob
I Projected screen position image by amount of shift
* The projected screen position can only shift in an up-and-down direction.
The illustration shows the screen shifted sidewise for the purpose of explanation.
Approx. 55%
Approx. 50%
Approx. 30%
Installing the Projector
19

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido