Basic Operations
I Projector's buttons
PRESET button
EXIT button
I Remote control unit
SCREEN W/S button
FOCUS +/– button
ZOOM T/W button
PRESET button
EXIT button
34
STAND BY
LAMP
TEMP
OPERATE
HIDE
PC
KEYSTONE
VIDEO
PRESET
MENU
EXIT
ENTER
QUICK
ALIGN.
OPERATE
HIDE
W
W
SCREEN
SCREEN
FREEZE
COMP
VIDEO
S
S
PC1
PC2
DVI
Y/C
T
T
DIGITAL
ZOOM
FOCUS
KEYSTONE
ZOOM
W
W
PRESET
MENU
EXIT
ENTER
RM-M160 REMOTE CONTROL UNIT
3. Adjust the Screen Size (Zooming)
How to adjust the projected screen size differs depending on
the lens unit (optional) you are using.
GL-M2910G (without zooming function):
The projected screen size cannot be changed.
GL-M2915SG/GL-M2920ZG/GL-M2930SZG (with
zooming function):
Adjust the projected screen size with the following buttons on
the remote control unit.
Note
• The function of GL-M2915SG is to adjust the view angle
zooming by 2%. (For fine view angle adjustment)
To enlarge the projected screen size
Press the ZOOM W (Wide) button.
To reduce the screen size
Press the ZOOM T (Tele) button.
Remote control unit
DIGITAL
ZOOM
4. Adjust Focus
Adjust focus with the following buttons on the remote control unit.
To focus on farther points:
Press the FOCUS + button.
To focus on nearer points:
Press the FOCUS – button.
Remote control unit
FOCUS
5. Setting the Screen Aspect Ratio
Set in accordance with the screen aspect ratio that will be
used. When a screen aspect ratio of 16:9 is used, a 4:3
image can be projected within the screen without using the
zoom function.
When using a 16:9 screen:
Press the "W" button.
When using a 4:3 screen:
Press the "S" button.
Remote control unit
SCREEN
SCREEN
* There is no button on the unit.
* This setting can also be performed from the menu. (Refer
to page 46.)
• When using a screen with a 16:9 aspect ratio
When set to "S" (4:3)
* If a 4:3 image is projected, some
parts of the top and bottom of the
image may not be displayed.
When set to "W" (16:9)
* A 4:3 image will be displayed in full
in the middle of the screen.
T
W
W
W
S
S