Setting The Rec (Recording) Timer - JVC MX-KB2 Manual De Instrucciones

Preparation for each music source:
Perform the following operation according to the music source
you have selected. Then, the System enters Volume Setting
mode.
When selecting TUNER FM or TUNER AM:
Press the ¢ or 4 button to select the preset station
number, then press the SET button.
When selecting CD :
Press the ¢ or 4 button to select the disc number, then
press the SET button.
Each time you press the button the disc number changes as fol-
lows:
DISC 1 = DISC 2 = DISC 3 = (back to the beginning)
When selecting TAPE:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON
time set by the System.
To allow this, the equipment should have the timer function.
5
Setting the volume level.
Press the ¢ or 4 button to select the volume level.
MIN, 1-30, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
6
Press the SET button.
The timer setting is completed, and "SET OK" appears on the
display. Then the display returns to the display before you set
the Timer.
7
Press the STANDBY/ON button to turn
off the System if neccessary.
The Timer indicator ( ) and "DAILY" indicator are lit on the
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
• When the timer ON-time comes, and the System automatically
turns on. The music source you have set is played. The Timer
indicator ( ) and "DAILY" indicator blink during timer oper-
ation.
• When the timer OFF-time comes, the System automatically
turns off. Then, the Timer indicator (
tor remain lit on the display.
• If the System is already on when the timer ON-time
comes, the Daily Timer does not work.
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the
Daily Timer will be activated at the same time every day until it is
canceled.
To cancel the Daily Timer temporarily:
1
2
To activate the cancelled Daily Timer:
1
2
• If the System is unplugged, or a power failure occurs,
Setting the REC (Recording)
Timer
With the Recording Timer, you can make a tape of a radio broad-
cast automatically whether or not you are home.
• You can set the REC Timer whether the System is on or
• The volume level is automatically set to MIN when REC
• Perform each setting within approx. 8 seconds. Other-
) and "DAILY" indica-
• If you have made a mistake while setting the timer, press
Press the CLOCK/TIMER button on the Unit
repeatedly until the "DAILY" appears on the
display.
Press the CANCEL button on the Unit.
"CANCEL" appears and both the Timer indicator (
"DAILY" indicator go out.
Press the CLOCK/TIMER button on the Unit
repeatedly until the "DAILY" appears on the
display.
The "DAILY" indicator and the Timer indicator (
the dispaly.
Press the SET button on the Unit.
"SET OK" appears on the display. The Timer indicator (
and the "DAILY" indicator remain lit, and the display returns
to the original display.
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
off.
Timer is used.
wise, setting will be cleared and the procedure must be
repeated from the beginning.
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
Using the Timers
) and the
) blink on
)
22