Timer Operations; Setting The Timer - JVC UX-G45 Manual De Instrucciones

Remote control
CLOCK/
TIMER
23

Timer Operations

Setting the Timer

Using Daily Timer, you can wake up with music, etc. On the
other hand, with Recording Timer, you can make a tape of a
radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
STANDBY/ON
one of the four settings above at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
SET/RESUME
required.
CANCEL
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
PRESET UP,
PRESET DOWN
How Daily Timer actually works
Once the Daily Timer has been set, the timer (
indicator and timer number indicator (1, 2, or 3) are lit on
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually or another
Daily Timer is activated.
When the on-time comes
The System turns on, tunes in to the selected station, or
starts playing the specified source.
• If "P – – –" is selected, the last tuned station will be
• If "VOL – – –" is selected, the last specified value is
• While Daily Timer is working, the timer (
• The timer setting remains in memory until you change
• Without canceling the Daily Timer, you can change the
How Recording Timer actually works
When Recording Timer has been set, Timer (
indicator and the REC indicator are lit on the display.
Recording Timer works only once.
When the on-time comes
The System turns on, tunes in to the specified station, and
starts recording.
• If "VOL – – –" is selected, the last specified value is
When the off-time comes
The System stops recording, and turns off (stands by).
• The timer setting remains in memory until you change
Remote
ONLY
selected for Daily Timer.
selected.
timer number indicators (1, 2, or 3) flash on the display.
it.
source or adjust the volume after Daily Timer starts
playback.
selected.
it.
)
) and
)