Picture Features; Colour System; Digital Vnr - JVC AV-29TX1EP Manual De Instrucciones

Picture Features

MENU
PICTURE FEATURES

DIGITAL VNR

DigiPure

COLOUR SYSTEM

TV OK
1
Display MENU.
MENU
OK
2
Choose PICTURE FEATURES.
P
P
3
Display the Picture Features menu.
MENU
OK
Digital VNR
When you set the Digital VNR to ON, you can reduce the
noise on the screen to improve picture quality further.
1
Press to choose DIGITAL VNR.
/
2
Press to choose ON.
/
• To cancel the Digital VNR, choose OFF.
3
Press .
OK
This completes the setting.
DigiPure
When the DigiPure is set to ON, optimum edge compensation
is applied to each portion of the same picture through digital
edge compensation. Thus, Clear and natural looking images
are obtained.
1
Press / to choose DigiPure.
2
Press to choose ON.
/
• To cancel the DigiPure, choose OFF.
3
Press .
OK
This completes the setting.
Notes:
• Set the DigiPure to ON normally.
• The DigiPure setting can be changed using the buttons
on the TV's front panel. Pressing the
seconds or longer causes the current DigiPure setting to
be displayed. Change the DigiPure setting while it is be-
ing displayed using the - / + buttons.
16
ON
OFF
OFF ON
button for 5
Colour System
The colour system is automatically chosen, but if the picture
is not clear or no colour appears, choose the colour system
manually.
1
Press / to choose COLOUR SYSTEM. Then
Press
.
OK
.
COLOUR SYSTEM
PAL
TV OK
2
Press / to choose the appropriate colour
system.
PAL:
PAL system.
SECAM:
SECAM system.
NTSC3.58:
NTSC 3.58 MHz system.
NTSC4.43:
NTSC 4.43 MHz system.
AUTO:
Automatic colour system selection.
Notes:
• The AUTO may not function properly with poor sig-
nal quality. If the picture is abnormal in AUTO
mode, choose another colour system manually.
• When in the TV mode (PR 1 to PR 99), you cannot
choose AUTO, NTSC 3.58 or NTSC 4.43.
• When in the TV mode (PR 0), you cannot choose
NTSC 3.58 or NTSC 4.43.
3
Press .
OK
This completes the setting.