Picture Menu - JVC AV-28BH8ENB Manual De Instrucciones

Setting Balance:
• Using “ “ or “ ” button select Balance.
• Press “ ” button to change balance rightward.
• Press “ ” button to change balance leftward.
Equalizer:
You can enter Equalizer menu by using “ ” or “ ” button after
selecting this item in sound menu.
You can also select between the following modes: Flat, pop,
rock, jazz, classic and user using the “ ” or “ ” button.
When you come to user, press “ ” button to select the 120Hz
item first. Using “ “ or “
then press “ ” button to adjust the levels of other frequen-
cies. When you press menu or standard button, the changes
will be stored in the user item automatically.
Effect:
You can use this feature to switch on and off sound effect.
Pressing “ ” or “ ” button will turn on and off this feature. If
the current sound system is MONO and the sound effect is
set ON, then the sound will be heard as if it is STEREO. If
the current sound system is STEREO, switching this effect
on will make the sound deeper. Switching it off will make no
change in MONO and STEREO.
” button adjust the level and
ENGLISH - 6 -

Picture Menu

To change picture settings:
• Press “MENU” button, now you are in main menu. In the
main menu, select PICTURE using “
then enter the picture menu pressing “ ” or “ ” button.
You can change the values of this items firstly by selecting
the item by “ “ or “
“ ” button. The PICTURE menu disappears and level indica-
tors are displayed while items are changed. The PICTURE
menu is restored after adjustment is finished.
• You can change the Brightness by “ ” or “ ” button after
selecting this item.
• You can change the Contrast by “ ” or “ ” button after se-
lecting this item.
• You can change the Colour by “ ” or “ ” button after select-
ing this item.
• You can change the Sharpness by “ ” or “ ” button after
selecting this item.
• You can adjust the Tint item as normal, warm and cool. Us-
ing “ ” or “ ” button toggle between these three settings.
“ or “
” button and then by using “ ” or
” button,