Hilti PRE 38 Manual De Instrucciones página 25

1 PRE 38 and PRA 380 operating instructions
1 PRA 38 operating instructions
1 PRA 87 battery pack
1 PRA 88 battery charger
1 PRA 89 AC adapter
6 Batteries (size AA cells)
en
3 Manufacturer's certificates
1 Hilti toolbox
2.11 Operating status indicators
The tool is equipped with the following operating status indicators: Auto-leveling LED, charging LED.
2.12 PRE 38 grade laser LED indicators
LED (green) lights constantly
LED (green) blinks
2.13 PRA 88 battery charging LED indicators
LED (red) lights constantly
LED (green) lights constantly
LED (green) blinks
LED (red) blinks
2.14 Normal display
X
Y
2.15 Menus
Virtual beam shields
Speed of rotation
Communication channel
Sensitivity setting
Shock warning
Warning signal
2.16 Display bar
Transmission status
Battery status
Speed of rotation
Communication channel
Leveling indicator
20
Inclination has been set. The rotary head rotates and the laser beam is
switched on.
Inclination setting is active. The rotary head does not rotate and the laser
beam is switched off.
PRA 87 battery pack is charging.
PRA 87 battery pack is fully discharged.
PRA 87 battery pack not inserted correctly.
PRA 87 battery pack protection system is active and the laser is ready
for operation.
Inclination in the X-axis (digits blink when in inclined mode)
Inclination in the Y-axis (digits blink when in inclined mode)
The laser beam is emitted in the dark shaded areas. The laser beam is
shut off in the light areas.
300 / 600 / 900 r.p.m.
Channels 1 to 9
Low vibration / high vibration / manual
Active / inactive
Active / inactive
Transmitting / finished / incomplete
Charge status >75% / 35%-75% / 10-35% / <10%
300 / 600 / 900 r.p.m.
Channels 1 to 9
Blinks while leveling.