Lenco DAR-050 Manual Del Usuario página 7

Skip up (13) again to select FM stereo, then press Enter button (4) to confirm. When
stereo signals are weak and noisy. It is preferable to change the FM mode by same
procedure.
Hints for best reception:-
FM: the receiver has rod antenna (18) hanging at the rear cabinet. This antenna should be totally
unraveled and extended for best reception.
Radio data system (RDS) (On remote control only)
This is the features to display the information which released from the radio broadcast and will
showed on LCD display step by step as below by pressing the Play mode/info button continuously
(on remote control).
Radio text  program type  frequency  mono/stereo  time  date
Digital audio broadcasting (DAB) radio
1. Set the unit to DAB mode by press Function button (7).
2. Press the Play/pause
one time. Press Skip down
channel then press Stop/E te button (10) to confirm the selected channel.
3. Press the Play mode/info button (on remote control) continuously to check the below info
released by DAB.
signal strength  program type  Group name  frequency  signal error  transfer rate
 time  date
4. Adjust volume knob (14/15) for the desired volume level.
Dynamic range control
This apparatus provide three dynamic range mode to match different program type in DAB mode.
1. In DAB mode, press Me u/Me / lk-adj button (16) to enter the Me u , then press Skip
down (12) or Skip up
2. Press Stop/E te
(13) button to select DRC high/lo /off mode. Then press Stop/E te
Skip up
(4) to confirm the setting.
3. In any state press Me u/Me / lk-adj button (16) to quit the setting mode
Language setting
This apparatus provide 4 language for FM/DAB operation display.
1. In DAB/FM mode, press Me u/Me / lk-adj button (16) to enter the Me u , then press
Skip down (12) or Skip up
2. Press Stop/E te button (4) to enter the System setting, then press Skip down
(13) button to select La guage then press Stop/E te button to enter
Skip up
language mode, then press Skip down
desired language between English/French/German/Italian. Then press Stop/E te button (4)
to confirm the setting.
3. In any state press Me u/Me / lk-adj button (16) to quit the setting mode
Preset stations
You can store up to total of 20 radio stations in the memory (10-FM/10-DAB).
1. Set to FM/DAB mode.
2. Turn to the desired radio station by
3. Press and hold the Me / lk-adj button (16) to enable memory state.
/Scan button (3) once, unit will start to full scan from range 11b-12d
(12) or Skip up
(13) button to select DRC .
button (4) to enter the DRC setting, then press Skip down
(13) button to select System .
a ual or auto tuning method.
(13) button to select your desired DAB
(12) or Skip up (13) button to select your
7
(12) or
button
(12) or