Attaching The Splash Proof Covers; Attaching The Control Panel Cover - Sony PVM-1353MD Manual De Instrucciones

Attaching the Splash Proof Covers

In order to protect the ventilation holes from splashes (of
medicines, etc.), attach the splash proof covers (supplied) as
shown below.
1
Making sure the arrows on the cover are facing down,
hook the nails on the upper edge into the ventilation holes.
Note
Attach the splash proof covers to all them ventilation holes.

Attaching the Control Panel Cover

In order to protect the control buttons on the front panel
from undesired touching, attach the supplied control panel
cover.
1
Attach the panel hinges to the left and right grips from the
inner side.
12
Nails on the upper edge
Arrows
Splash proof covers
Panel hinges
2
Push up the nails on the bottom edge and fit the cover into
the lowest ventilation holes.
Attach the both covers to the left and right sides.
2
Control panel cover
Fit the bosses on the both sides of the control panel cover
into the lower holes of the panel hinges with bending the
control panel cover a little.
Nails on the
bottom edge
Boss