Sears KENMORE ELITE 66578002700 Manual De Uso Y Cuidado página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The insert can also be removed to provide room for large items
such as a turkey and casseroles.
To Remove
Oven Racks:
Flat Racks: Pull rack out to the stop position, raise the front edge,
and then lift out.
RollerGlide
TM
Rack: See "RollerGlide
TM
Rack" section.
k
To Replace Oven Racks:
Flat Racks: Place rack on the rack support in the oven. Tilt the
front edge up slightly, and slide rack back until it clears the stop
position. Lower front and slide back into the oven.
RollerGlide
TM
Rack: See "RollerGlide
TM
Rack" section.
Rack Positions
--5
--4
__3
--2
--1
Traditional Cooking
FOOD
RACK POSITION
Large roasts, turkeys, angel food, bundt
1 or 2
and tube cakes, quick breads, pies
Yeast breads, casseroles, meat and
2
poultry
Cookies, biscuits, muffins, cakes
2 or 3
2-rack baking and broiling
4
Toasting bread or broiling very thin
5
foods and 2-rack baking.
Convection
Cooking (on some models)
FUNCTION
NUMBER OF
RACK
RACKS USED
POSITION(S)
Convection baking or
1
1, 2 or 3
roasting
Convection baking
2
2 and 4
Convection baking
3
1,3 and 5
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
NUMBER
POSITION ON RACK
OF PAN(S)
1
Center of rack.
2
Side by side or slightly staggered.
3 or 4
Opposite corners on each rack. Make sure that
no bakeware piece is directly over another.
Ro
de
Rack
The RollerGlide
TM
rack allows easy access to position and
remove food in the oven. It can be used in rack positions
1 through 4. Do not put the RollerGlide
TM
rack in position 5
because it will not fit.
Open Position
A. RollerGIide
TM
rack
B. Sliding shelf
Closed
and Engaged
Position
TM
A. RollerGIide
rack
B. Sliding shelf
10

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido