Start-Stop Of Pump; Advanced Control Panel - Grundfos CRE Instrucciones De Instalación Y Operación

Start-stop of pump

If you have stopped the pump by pressing
the "Stop" text on the control panel is illuminated, you
can only give it free to operation by pressing
again.
If you have stopped the pump by pressing
can restart it by pressing
GO.
Start the pump by pressing
until the desired setpoint is indicated.
Stop the pump by pressing . When the pump is stopped, the
"Stop" text next to the button is on. You can also stop the pump by
continuously pressing until none of the light fields are on.
You can also stop the pump with Grundfos GO or via a digital
input set to "External stop". See section
Resetting of fault indications
You can reset a fault indication in one of the following ways:
• Via the digital input if you have set it to "Alarm resetting".
• Briefly press or on the pump. This does not change the
setting of the pump.
You cannot reset a fault indication by pressing
buttons have been locked.
• Switch off the power supply until the indicator lights are off.
• Switch the external start-stop input off and then on again.
• With Grundfos GO.

6.2 Advanced control panel

The pumps can be fitted with the advanced control panel as an
option.
6
Fig. 35 Advanced control panel
and
, you
or by using Grundfos
or by continuously pressing
8. Description of settings.
or if the
1
2
3
4
5
Pos. Symbol Description
Grundfos Eye
This shows the operating status of the pump.
1
For further information, see section
the position of the control
2 - Graphical color display.
3 It goes one step back.
With these buttons you can navigate between
main menus, displays and digits.
When you change the menu, the display always
shows the top display of the new menu.
With these buttons you can navigate between
submenus.
They change value settings.
Note: If you have disabled the possibility to make
settings with the "Enable/disable settings"
function, then you can enable it again temporarily
by pressing these buttons simultaneously for at
least 5 seconds. See section
4 product" ("Enable/disable
It saves changed values, resets alarms and
expands the value field.
It enables radio communication with Grundfos
GO and other products of the same type.
When you try to establish radio communication
between the pump and Grundfos GO or another
pump, the green indicator light in Grundfos Eye
flashes. A note also appears in the pump display
stating that a wireless device wants to connect to
the pump. Press
allow radio communication with Grundfos GO and
other products of the same type.
This makes the pump ready for operation/starts
and stops the pump.
Start:
If you press the button when the pump is
stopped, the pump only starts if no other
functions with higher priority have been enabled.
5
See section 8. Description of
Stop:
If you press the button when the pump is running,
the pump is always stopped. When you stop the
pump via this button, the
bottom of the display.
6 This button goes to the "Home" menu.
4.4 Changing
panel.
7.29 "Buttons on
settings").
on the pump control panel to
settings.
icon appears in the
23