Cautions For Handling And Operation - NSK Multi Pad Manual Del Usuario

CAUTIONS FOR HANDLING AND OPERATION

CONNECT ONLY NLX(nano) / NBX MOTOR. DO NOT CONNECT OTHER MOTOR.
Read these safety cautions thoroughly before use and operate the product properly.
These indicators will show you how to operate the product safely and prevent danger to you or others. They
are classified by degree and/or severity of danger. All contents relating to safety should be observed.
Classification
D A N G E R Provides an instruction where death or serious injury may occur.
W A R N I N G Provides an instruction where personal injury or physical damage may occur.
C A U T I O N Provides an instruction where minor to medium injury or physical damage may occur.
N O T I C E Provides an instruction that should be observed for safety reasons.
Do not attempt to disassemble the product or tamper with the mechanism. It may cause an electric shock or
fire.
Do not use for implant surgery.
The product is designed only for clinical dental use by qualified personnel.
The Multi Pad operation panel is not water proof and should not be exposed to water.
Do not use the Multi Pad as a handle when you want to move the dental unit.
Do not pull the motor cord with excessive force.
Be sure to press the buttons with a finger.
Connect this product to only NLX BF (NLX nano motor), iMD (NBX motor) and Varios 170 (OPTION).
When operating this product always consider the safety of the patient.
Prior to use, always check for vibration, noise, and overheating. If any abnormalities are detected, stop using
immediately and contact your Authorized NSK Dealer.
Should the Product function abnormally, cease operation immediately and return the Product to your
Authorized NSK Dealer for repair.
Care should be taken not to place the motor cord near a gas burner. Never attempt to repair a burned motor
cord. Always replace it with a new cord.
Do not exceed the drive motor speed recommended by the manufacturer.
In case of using a motor, ensure the Gear ratio on the display matches with the Gear ratio of the handpiece.
Confirm that rotation speed is set in stipulated range.
Do not use or leave the product in a high–temperature environment such as under strong direct sunlight, by
a fire or near stove. It may cause a malfunction for inner circuit or sudden heat generation.
Do not allow any impact on to the product. Do not drop the product.
If chemical, solvent or antiseptic solution is adhered to this product, immediately wipe it away. Discoloration
or deformation may occur if left as it is.
Multi Pad is not suitable for autoclave sterilization. Do not autoclave Multi Pad nor sterilize it in any high
temperature sterilization methods.
If the unit smokes or smells of burning, turn off the power immediately and disconnect the power plug.
Contact your Authorized NSK Dealer.
Degree and severity of danger or damage
DANGER
WARNING
CAUTION
2