Sattv Tp Control - 3B Elettronica 8110-AIR5 Manual Del Usuario

NIT RECOGNITION FEATURE:
You can find the CHANNEL LIST and the SATELLIRE Position in Uplink automatically by pressing the ENTER button
when you have moved the IF Frequency cursor on a signal in the Spectrum Analysis menu.
NOTE: The satellite name might be indicated wrong due to the information in the NIT data in some cases when the
NIT data in the signals transmitted by the broadcasting institution should be faulty or when the broadcasting company
broadcasts to 2-3 satellites simultaneously.
You can see the channel lists, and record the channels into the memory with the setting performed with the Universal
LNB.
SATELLITE TP CONTROL MENU:
Press on the MENU button and select from the MAIN MENU the option SATELLITE TP CONTROL. The Satellite TP
Control menu allows also the indication of the signal levels of multiple TP frequencies.
SINGLE SATELLITE CONTROL:
Rev.0 0.2019 Tel.039616417
Select SINGLE as type and press on ENTER after
having performed
settings.As to be seen on the screen; it possible to
visualize the signal levels of 4 different frequencies
from 1 satellite on the same screen. With this, you
can control whether the signal levels and antenna
setting are correct at all frequencies, or not.
info@3belettronica.com
49
the necessary SATELLITE
www.3belettronica.com