3B Elettronica 8110-AIR5 Manual Del Usuario página 71

LEVEL BUTTON: In this screen, once you press the LEVEL button, the C / N value will be displayed.
MENU BUTTON: When you press the MENU button on the SPECTRUM ANALYSIS screen, you can easily perform
measurements with the on-screen functions.
AUTO RANGE: Automatically determines the measuring range according to the highest and lowest signal level on the
Spectrum screen.
FILL / LINE: You can see the levels in the Spectrum screen as full or in line.
CAPTURE FUNCTIONS: You can save your measurement with the SAVE CAPTURE feature at the time of measuring the
Spectrum, and then use the LOAD CAPTURE function to recall and use it as a reference.
SAVE TO USB: You can save the measured values in the Spectrum display as a * .CSV table on your USB display.
Rev.0 0.2019
EDIT BUTTON: SPECTRUM ANALYSIS screen, you can manually change your measured
values by pressing EDIT.
IF FREQ: You can see the frequency on which the marker is on.
SPAN: You can select the frequency range you want on the screen.
Ref .: You can select the highest measuring point.
Range: You can select the signal level range you want to measure.
Tel.039616417 info@3belettronica.com
71
www.3belettronica.com