Clicking on the OK button:
When you move your marker to any signal top point on the spectrum screen and press on OK, then will this find
automatically any digital broadcast of this frequency, if any. You can click on the CHANNEL LIST and see the names of
the channels. You can record the channels you have found into the memory by clicking on the RECORD CHANNELS
box.
CONTELLATION MENU:
Press the MENU button and go to the TERRESTRIAL TV MENU screen and here you can start measuring by selecting
the CONSTELLATION box The constellation screen is a professional screen, where you can see the quality of the digital
signal you have measured.
You can see on the same screen both the constellation and the other signal parameters and perform rapid and reliable
measurements.
TILT /LIMIT MENU:
The Inclination/Limit List test is an efficient solution for controlling the order of the cable system and the further
weakening of the wave at high frequencies. It can acquire the levels of 12 channels and observe the measurement
result, graphics easily. You can select the start of the first 6 frequencies of the group and the last 6 frequencies as of
the end of the group. Then you can control the inclination and arrange the amplifiers and elements according to this
inclination.
Rev.0 0.2019
Tel.039616417
info@3belettronica.com
www.3belettronica.com
65