3B Elettronica 8110-AIR5 Manual Del Usuario página 64

Clicking on the MENU button:
The screen above will appear when we click on the MENU button while you are in the Spectrum screen.
AUTO RANGE: Determines the top and lowest levels of the signal levels and establishes the screen indicator range
according to this.
LINE/FILLED: Shows the spectrum image in lines or filled.
SPEKTRUM CAPTURE: Records the spectrum image on the screen and you can call this lined visualization at a later
time and compare it with the last measurement you have performed.
SAVE TO USB: You can record the image data on the spectrum screen on your USB memory card.
Clicking on the LEVEL & EDIT button:
The Marker will show the C/N value at a point in accordance with the frequency on the screen when the LEVEL button
is pressed.
When you change the Marker's IF FREQUENCY will the marker exactly pursuant to the change slowly move on the
spectrum when the EDIT button is pressed.
SPAN: You can display the frequency range you wish on the screen by selecting one of the options among
FULL/15/30/50/100/200/500MHz.
REFERENCE: Determined the measurement point
RANGE: Determines the range between the lowest measurement point and the top measurement point.
MODE: The spectrum will move at the optimal speed when NORMAL is selected. The spectrum will move faster when
FAST is selected, even if the image shouldn't be displayed that detailed.
Rev.0 0.2019 Tel.039616417 info@3belettronica.com www.3belettronica.com
64