3B Elettronica 8110-AIR5 Manual Del Usuario página 73

MOBILE SETTINGS :
With Mobile Settings, you can make the device easier to use.
POWER UNIT: You can change the display of the signal levels in dBuV, dBmV and dBm.
CALIBRATION: You can capture the Calibration value of the device by selecting the difference in unexpected changes
in the signal levels of the device.
AHD / CVI / TVI / CVBS Camera Interface:
The device will set over to the video input mode when you press on the AV IN button for 1 second while you are in
any menu and the test below will appear on the screen. Thus you can perform the installation of cameras and test the
quality of videos by connecting external videos.
Rev.0 0.2019
EDIT BUTTON: SPECTRUM ANALYSIS screen, you can manually change your
measured values by pressing EDIT.
IF FREQ: You can see the frequency on which the marker is on.
SPAN: You can select the frequency range you want on the screen.
Ref .: You can select the highest measuring point.
Range: You can select the signal level range you want to measure.
Tel.039616417 info@3belettronica.com
73
www.3belettronica.com