Cable Tv Constellation; Cable Tv Tilt / Limit - 3B Elettronica 8110-AIR5 Manual Del Usuario

Clicking on the OK button:
When you move your marker to any signal top point on the spectrum screen and press on OK, then will this find
automatically any digital broadcast of this frequency, if any. You can click on the CHANNEL LIST and see the names of
the channels. You can record the channels you have found into the memory by clicking on the RECORD CHANNELS
box.
CONSTELLATION MENU:
Press the MENU button and go to the CATV MENU screen and here you can start measuring by selecting the
CONSTELLATION box. The constellation screen is a professional screen, where you can see the quality of the digital
signal you have measured.
You can see on the same screen both the constellation and the other signal parameters and perform rapid and reliable
measurements.
TILT/LIMIT MENU:
The Tilt/Limit List test is an efficient solution for controlling the order of the cable system and the further weakening of
the wave at high frequencies. It can acquire the levels of 12 channels and observe the measurement result, graphics
easily. You can select the start of the first 6 frequencies of the group and the last 6 frequencies as of the end of the
group. Then you can control the inclination and arrange the amplifiers and elements according to this inclination.
Rev.0 0.2019 Tel.039616417 info@3belettronica.com www.3belettronica.com
58