Digital Connection To An Av Amplifier With Built-In Decoder - Denon DVD-3800BDCI Instrucciones De Funcionamiento

Connections
1
* If "BD Audio Mode" is set to "Mix Audio Output" audio will be output as Multi LPCM. Refer to page 23.
2
* Outputs audio signals decoded from independent substream.
* 3 Outputs audio signals decoded from Dolby TrueHD audio stream.
4
* For DTS-HD Master Audio, outputs audio signals decoded from DTS-HD audio stream, and for
DTS-HD High Resolution Audio, outputs audio signals decoded from DTS core stream.
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi
LPCM or 2ch Downmix LPCM depends on the capability of the connected device even if you select
"HDMI Multi(Normal)" in"HDMI Audio Out" setting. Refer to page 32.
Copyright protection system
To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both
the unit and the display device (or an AV amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that
comprises data encryption and authentication of the connected AV device. This unit supports HDCP.
Please read the operating instructions of your display device or AV amplifier) for more information.
* HDMI: High-Definition Multimedia Interface
Note
• When using HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI
jack, this unit cannot be controlled by another device via the HDMI jack.
• The audio signals from the HDMI jack (including the sampling frequency, the number of
channels and bit length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (e.g, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.

Digital Connection to an AV Amplifier with Built-in Decoder

digital audio coaxial/
audio
optical cable
DIGITAL AUDIO INPUT
DIGITAL AUDIO INPUT
OPTICAL COAXIAL
digital audio coaxial/
optical input jack
DIGITAL OUT ( PCM / BITSTREAM )
DIGITAL OUT ( PCM / BITSTREAM ) HDMI OUT
OPTICAL COAXIAL OPTICAL COAXIAL
or
RS-232C
FR FL
2ch AUDIO OUT
STRAIGHT CABLE
SW C SR SL SBR SBL
Y P /C B B P R /C R
IN OUT
ROOM TO ROOM
REMOTE CONTROL
7.1ch AUDIO OUT
VIDEO OUT S VIDEO OUT COMPONENT VIDEO OUT
this unit
Audio signals output from DIGITAL OUT (OPTICAL/COAXIAL)
When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from
the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will be
output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.
< When HDMI is not connected or "Audio Mute" is selected···>
When HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio Out" setting, the audio signals
output from DIGITAL OUT changes depending on the "Digital Out" setting. Refer to the following table.
To set "Digital Out", press [SETUP], then select "Quick" A "HDMI Audio Out" A "Audio Mute" or
"Custom" A "Audio" A "HDMI Audio Out" A "Audio Mute".
Disc type Audio recording format
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
BD-video
DTS
DTS-HD
LPCM
AAC
BD-RE/BD-R
LPCM
Dolby Digital
DVD-video DTS
LPCM
Dolby Digital
®
DivX
MP3/MP2
audio CD/ MP3/Windows Media™ Audio
DTS-CD
1
* When "BD Audio Mode" is set to "Mix Audio Output", "HDMI Audio Out" is set to "Audio Mute" and
"Digital Out" is set to "Bitstream", those audio will be output as Dolby Digital.
• This table applies only when HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio Out" setting.
Note
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set "BD Audio Mode" to "Mix Audio Output" and set "HDMI Audio Out" to "HDMI Multi(LPCM)".
Note for Optical Cable
• Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 6 inches (15cm) or more when storing them.
• Use a cable which is 9.8 feet (3m) or shorter.
• Insert cable plugs firmly into the jacks when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack.
Cables not included.
Please purchase the necessary cables at your local store.
12
ENGLISH
Connections
"Digital Out" setting
Bitstream LPCM
Dolby Digital 2ch Downmix LPCM
Dolby Digital 2ch Downmix LPCM
Dolby Digital 2ch Downmix LPCM
DTS* 1 2ch Downmix LPCM
1 2ch Downmix LPCM
DTS*
2ch Downmix LPCM* 1 2ch Downmix LPCM
2ch Downmix LPCM 2ch Downmix LPCM
2ch Downmix LPCM 2ch Downmix LPCM
Dolby Digital 2ch Downmix LPCM
DTS 2ch Downmix LPCM
2ch Downmix LPCM 2ch Downmix LPCM
Dolby Digital 2ch Downmix LPCM
2ch LPCM 2ch LPCM
2ch LPCM 2ch LPCM
DTS 2ch Downmix LPCM
ENGLISH