Virtual Surround; Pure Direct Mode; Setting The Bd Audio Mode - Denon DVD-3800BDCI Instrucciones De Funcionamiento

ENGLISH
Playback
Advanced AL24
ON / STANDBY
ON OFF
VIDEO NR
[ / / / ]
[PURE DIRECT]
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control

Virtual Surround

BD-V DVD-V DVD-VR
You can enjoy stereo phonic virtual space through your existing
2-channel stereo system.
HDMI VIDEO NOISE
SD CARD RESOLUTION REDUCTION
1) In stop mode, press [MODE] repeatedly until the virtual
DVD-3800BDCI
BLU-RAY DISC PLAYER
surround setting appears.
Off
2) Use [ / ] to select "1" (Natural effect), "2" (Emphasized
effect) or "Off".
3) Press [RETURN] to exit.
Note
• Select virtual surround "Off" or lower the volume if the sound
is distorted.
• This function cannot be used during dialog speed (refer to page 17).
• For the virtual surround, audio signal will always be 2-channel LPCM.

Pure Direct Mode

BD-V DVD-V DVD-VR
[ENTER]
DivX ®
[RETURN]
Use this function to shut down unused circuitry to achieve high
quality analog sound.
[MODE]
1) Press [PURE DIRECT] repeatedly to select your desired pure
direct mode.
• Each time you press [PURE DIRECT], the pure direct mode
changes as "Normal" A "Video Off" A "Display Off" A
"All Off" A "Normal". The modes will be displayed on the
front panel display.
Video / audio outputs for each mode
"Normal"
"Video Off"
"Display Off"
"All Off"
Note
• If you turn off the unit or put this unit to standby mode, the
pure direct mode will go back to "Normal".
CD MP3
WMA
: Normal playback mode (pure direct mode
is off).
: Video signal will not be output.
: Circuitry for front panel display and
indicators will be shut down.
: Video signal will not be output and
circuitry for front panel display and
indicators will be shut down.
23
ENGLISH

Setting the BD Audio Mode

BD-V
BD audio mode is to choose between two ways; you could output
the secondary and interactive audio accompanied by the primary
audio or you could output the primary audio only. Depending on
the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus,
Dolby TrueHD, or DTS-HD output changes between Multi LPCM
and bitstream.
1) In stop mode with BD inserted, press [MODE].
2) Use [ / ] to select desired setting.
"Mix Audio Output"
If it is available, BD video's secondary and interactive audio will be
output with the primary audio.
• The secondary audio is the audio for the sub picture
(Director's comment etc.) and the interactive audio is the
audio for the interactive application (Button click sounds
etc.).
"HD Audio Output"
Only the primary audio will be output. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD sound of BD through HDMI connection.
3) Press [RETURN] to exit.
• You can also set "BD Audio Mode" from the setup menu.
Refer to page 32.
Note
• In "Mix Audio Output" mode, even you set "HDMI
Multi(Normal)" in "HDMI Audio Out" setting, multi LPCM will
be output from HDMI OUT for BD audio. Refer to page 11.
• In "Mix Audio Output" mode with HDMI audio being output,
2-channel downmix LPCM will be output from DIGITAL OUT
for BD audio.
• In "Mix Audio Output" mode with "HDMI Audio Out" set to
"Audio Mute" and "Digital Out" set to "Bitstream", DTS,
DTS-HD and LPCM will be output as Dolby Digital for BD
audio. Refer to page 12.
• In "Mix Audio Output" mode, from 7.1ch AUDIO OUT, Dolby
Digital Plus, Dolby TrueHD and DTS-HD will be output as
multi LPCM decoded from its corresponding core stream.
Playback