Denon DVD-3800BDCI Instrucciones De Funcionamiento página 35

Function Setup
Setting items
TV Active Area
Sets the horizontal display area for
interlace (480i) output.
Wall Paper
Sets the picture to be displayed on
the screen for stop mode or audio
playback mode.
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
mark.
• For "HDMI RGB Setting", select "Enhanced" if the black-white contrast is not clear. The setting is
effective only for HDMI RGB output.
• If you set "HDMI Video Resolution" to "1080p24" and set "I/P Direct" to "On", and the contents of
the BD is not compatible for 1080p24 frame, 1080p60 frame will be output.
• An individual picture on the screen is called as "Frame" , which consists of two separate images
called as "Field". Some pictures may be blurred at the auto setting in "Still Mode" due to their
data characteristics.
• If the picture is not output properly to the display device because of the "HDMI Video
Resolution" or "Component Output" setting, press and hold B on the front panel for more than
5 seconds. Both settings will be reset to the default automatically.
• For "TV Aspect", 4:3 squeeze function is not available during BD playback.
• If HDMI is connected, for video resolution for the component output, you can only select video
resolution that currently output from HDMI OUT or 480i.
• If the video resolution for the component output and HDMI video resolution does not match, the
video resolution for the component output will be switched to 480i. COMPONENT VIDEO OUT
jacks may not output any signals depend on the disc material.
• If you set "I/P Direct" to "On", there is no output from VIDEO OUT, S VIDEO OUT and COMPONENT
VIDEO OUT jack.
• COMPONENT VIDEO OUT jacks may not output any signals when you set the "HDMI Select" to
"RGB" or "HDMI Deep Color" to "Auto".
• If you play back copy-protected DVD video, 480p signal will be output from the COMPONENT
VIDEO OUT jacks, when "Component Output" is set to "480i", "720p" or "1080i".
• If connected display device does not support 1080p24 frame or "I/P Direct" is set to "Off",
"1080p24" in "HDMI Video Resolution" will be displayed in gray and you can not select the item.
Options
Normal:
Select this if the image is not stable with connecting to
professional-use display.
Full*:
Select this for connecting to commonly-marketed
display.
Picture*
Blue
Black
Gray
Audio
Audio
BD Audio Mode Mix Audio Output
HDMI Audio Out HDMI Multi (Normal)
7.1ch Audio Out Multi Channel
Down Sampling Off
DRC Auto
Source Direct Off
Bass Enhancer Off
• For how to select the setting items and options, refer to "Custom" on page 29.
Setting items
BD Audio Mode
For BD, select whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary
audio. Refer to "Setting the BD
Audio Mode" on page 23.
HDMI Audio Out
Sets the audio format for the audio
output from the HDMI OUT.
32
ENGLISH
Audio
Virtual Surround Off
Options
Mix Audio Output*:
Output the secondary and interactive audio with
primary audio if it is available.
HD Audio Output:
Output only the primary audio. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD sound of BD through HDMI connection.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from the
HDMI OUT with a bitstream or LPCM.
HDMI Multi(LPCM):
The multi-channel audio signals are output from the
HDMI OUT with a LPCM.
• Refer to pages 34-35 for setting options.
HDMI 2ch:
The audio signals are output from the HDMI OUT with a
downmixed to 2ch LPCM.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format
of the DIGITAL OUT.
• Refer to the "Digital Out Setting" on page 33 for setting
options.
ENGLISH
Function Setup