Voice Dialing; Options During A Call; Call Waiting; Make A Video Call - Nokia 6600 Fold Manual Del Usuario

If 1-touch dialing is deactivated, the phone asks whether you want to activate it.
Select Menu > Settings > Call > 1-touch dialing > On.
To call a number, press and hold a 1-touch-dialing key until the call begins.
■

Voice dialing

Make a phone call by saying the name that is saved Contacts.
As voice commands are language-dependent, before voice dialing, you must select Menu >
Settings > Phone > Voice recognition > Recognition lang., and your language. Do the Voice
recog. training by following the instructions on the display.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone sounds, and
Speak now is displayed.
2. Speak the name of the contact you want to dial. If the voice recognition is successful, a
list with matches is shown. The phone plays the voice command of the first match on the
list. If the match is incorrect, scroll to another entry.
■

Options during a call

Many of the options that you can use during a call are network services. For availability,
contact your service provider.
Possible options that your service provider may offer include conference calls, video sharing
and placing calls on hold.

Call waiting

To be informed that a call is waiting while you are on the phone (network service), select
Menu > Settings > Call > Call waiting > Activate.
To answer a waiting call during an active call, press the call key. The first call is put on hold.
To end the active call, press the end key.
■

Make a video call

When you make a video call, you send a real-time video, captured by the camera on the front
of your phone, to the recipient of the call.
To be able to make a video call, you must have a USIM card and be connected in a WCDMA
network. For availability of and subscription to video call services, contact your network
operator or service provider. A video call can only be made between two parties. The video
call can be made to a compatible phone or an ISDN client. Video calls cannot be made while
another voice, video, or data call is active.
1. To start a video call from the standby mode, enter the phone number, or select Contacts
and a contact.
20