Adjustments; Adjusting The Picture; Adjusting The Sound - Sony LMD-1041 Manual De Instrucciones

Adjustments

You can make adjustments using the buttons on either the
monitor or the remote commander.

Adjusting the picture

You can make adjustments for each signal separately.
1 Press the signal input button of the signal you want
to adjust.
LINE A LINE B LINE C
2 Select the parameter by pressing the adjustment
parameter buttons.
The selected parameter and its present setting in the bar
display appear.
Example: for the color adjustment
COL
3 Press the + or – button to adjust while watching the
picture.
When you finished the adjusting
The bar display automatically disappears after about 5
seconds.
Resetting the adjustment to the factory
setting
Press the RESET button using an object of 2.5 mm (1/8
inch) diameter.
All the parameters, except the backlight brightness, are reset
to the factory setting.
RESET
10

Adjusting the sound

Press the VOLUME + or – button.
VOLUME
Muting the sound
Press the MUTING button on the remote commander.
MUTING
Press again to cancel muting.