Oster FPSTJE318C Manual De Instrucciones página 27

4. Lift the lid up and remove it from the juice extractor (Figure 4).
5. In order to remove the filter basket and the filter, hold the filter basket with two
hands and then lift it straight up (Figure 5).
Fig. 4
WARNING: THE STAINLESS STEEL FILTER BASKET CONTAINS SMALL SHARP
BLADES TO CUT AND PROCESS FRUITS AND VEGETABLES. DO NOT TOUCH
BLADES WHEN HANDLING THE FILTER BASKET.
ASSEMBLING THE CITRUS JUICER ACCESSORY (model FPSTJE318C only)
Follow the assembling instructions listed below before using your unit with the
citrus juicer accessory:
1. Before you start assembling the citrus juicer accessory, make sure unit is
unplugged and it is placed on a dry and level surface.
2. Place filter basket on top of the motor base (Figure 1).
3. Insert axel into the bottom of the strainer and turn clockwise to lock in place
(Figure 2).
4. Place the strainer/axel assembly on top of the filter basket as indicated in the
figure (Figure 3).
Fig. 1
Fig. 5
Fig. 2
En g lish-8
Fig. 3