Oster FPSTJE318C Manual De Instrucciones página 30

ASSEMBLING THE PERSONAL MIXER ACCESSORY (model FPSTJE318C
only)
Follow the assembling instructions listed below before using your unit with the personal
mixer accessory:
1.
Before you start assembling the personal mixer accessory, make sure it is unplugged
and it is placed on a dry and level surface.
2.
Place the collar on top of the motor base, ensuring it is well adjusted on the base
(Figure 1).
3.
Place foods you would like to mix inside the cup and close the open end with the blade
assembly.
4.
Turn it clockwise to close it. Make sure that the blade assembly is tightly closed in
place before using the cup (Figure 2).
Fig. 1
5.
Turn the cup and place it on the collar making sure to fit the three slots and press it
down. Turn it counterclockwise until it stops "
6.
Raise the stainless steel locking arm and place it on the grooves on the sides of the
collar. Your appliance is equipped with a safety feature that will ensure the unit will not
operate unless the arm is properly locked (Figure 4).
Fig. 3
Fig. 2
"
(Figure 3).
Fig. 4
En g lish-1 1