Care And Cleaning - Oster FPSTJE318C Manual De Instrucciones

1. After disassembling all removable parts of the juice extractor, wash them by hand
with warm soapy water or in the dishwasher (top shelf only). If the pulp dries out
in the pulp collector container, the filter or the filter basket, let it soak in water for
approximately 10 minutes before washing it.
2. Wipe the motor base with a damp cloth.
3. It is very important to keep the filter very clean, free of residue blocking the holes
in order to ensure optimal performance. Wash it thoroughly with warm soapy
water. If the holes in the mesh remain blocked, soak the filter in hot water with a
water solution with 10% lemon juice.
NOTE: DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.
CLEANING THE PERSONAL MIXER ACCESSORY (model FPSTJE318C only)
The personal mixer accessory blades are sharp! Remove the blade assembly carefully
from the cup by unscrewing it counterclockwise. Wash it with warm water and dish
detergent. Rinse and dry well.
NOTE: MAKE SURE THE PARTS ARE NOT DAMAGED BEFORE ASSEMBLING
THEM BACK TOGETHER.
EXCLUSIVE FILTER AUTO-CLEAN TECHNOLOGY
Your juice extractor includes a patented innovative filter auto-clean technology that
makes cleaning a fast and easy task.
1. Remove food pusher from food chute.
2. Twist open food pusher lid.
3. Fill water compartment inside food pusher to the "MAX" level .
4. Replace and turn lid clockwise to lock it into place on food pusher.
5. Place food pusher back on food chute ensuring the tab on the food pusher aligns
with the top of the mechanism for auto-clean.
6. Turn the control knob to the auto-clean position.
7. Press and hold down the food pusher. Auto-clean feature will automatically shut
off after 30 seconds.
8. Stop pressing down on food pusher.
9. Turn control knob to the off position.
10. Remove and empty out the jar and pulp collector container and wash them.
Your juice extractor is now clean and ready to be used again.
Some plastic parts might stain when in contact with some fruits and vegetables
for too long. In order to avoid this from happening, all parts should be washed
immediately after each use.
CA R E A ND CLEA NING
MA I N T EN ANCE
En g lish -1 4