Advanced Operation; Pairing With Other Bluetooth Devices; What Is Pairing; Pairing Transmitter With Other Bluetooth Receiving Devices - Sony DR-BT22iK Manual De Instrucciones

Advanced operation

Pairing with other Bluetooth devices

What is pairing?

Bluetooth devices need to be "paired" with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing
again, except in the following cases:
 Pairing information is deleted aft er repair, etc.
 Th is product is paired with 9 or more receiving devices.
Th is product can be paired with up to 8 Bluetooth device respectively.
If a new device is paired aft er 8 devices have been paired, the device
whose latest connection time is the oldest among the 8 paired devices
is replaced by the new one.
 Th is product is initialized.
All pairing information is deleted (page 39).

Pairing transmitter with other Bluetooth receiving devices

1
Turn on the power of iPod.
(Make sure the iPod is in pause mode.)
2
Connect the transmitter to the iPod (page 16).
3
Place the transmitter and the Bluetooth receiving device to be
paired together within 1 m (3 ft).
4
Set the Bluetooth receiving device to enter "Pairing in process."
See the operating instructions supplied with the Bluetooth receiving
device.
Notes
 Passcode* of the transmitter is fi xed at "0000", "1234", or "8888." Depending
on the Bluetooth receiving device, it may be necessary to input the passcode
(in this case, "0000", "1234", or "8888"). Th e transmitter cannot be paired
with a Bluetooth receiving device whose passcode is not "0000", "1234", or
"8888."
 If the Bluetooth receiving device requires a passcode, input "0000."
* Passcode may be called "Passkey, " "PIN code, " "PIN number, " or "Password. "

Continued
GB 21