Sony DR-BT22iK Manual De Instrucciones página 38

Symptom
Sound break, noise
or playback speed
change.
Th e headset does not
operate properly.
Pairing cannot be
established.
Bluetooth connection
cannot be established
with a device that has
been "paired" before.
Cannot make the
Bluetooth connection.
Cannot make the
Bluetooth connection
from your mobile
phone to the headset.
38 GB
Cause / Remedy
 If a device that generates electromagnetic radiation,
such as a wireless LAN, other Bluetooth device(s),
or a microwave oven is nearby, move away from
such sources.
 Remove any obstacle between the transmitter and
the headset or move away from the obstacle.
 Locate the transmitter and the headset as near as
possible.
 Re-position or re-orient the transmitter and the
headset.
 Reset the headset. Pairing information is not deleted
by this operation.
Insert a small pin, etc., into the hole, and push until
you feel a click.
 Locate the transmitter and the headset as near as
possible.
 Check if you input correct passcode of the
transmitter (page 21).
 Check if you input correct passcode of the headset
(page 25).
 Locate the transmitter and other Bluetooth device(s)
as near as possible.
 Pairing information may be deleted. Pair the device
again.
 Check that this product is turned on.
 Th e Bluetooth connection is terminated. Make the
Bluetooth connection again.
 Press the multi function button of the headset. (Th e
Bluetooth connection is unavailable during music
playback on the headset.)
 Perform the Bluetooth connection with the Bluetooth
compatible mobile phone. (For details on how to
operate the Bluetooth compatible mobile phone, see
the operating instructions supplied with it.)