Pairing Headset With Other Bluetooth Transmitting Devices - Sony DR-BT22iK Manual De Instrucciones

Pairing headset with other Bluetooth transmitting devices

1
Place the Bluetooth transmitting device to be paired together
within 1 m (3 ft) of the headset.
2
Press and hold the POWER button of the headset for about 7
seconds or more to enter "Pairing in process" while the headset is
turned off .
Release the POWER button when the headset indicator starts
fl ashing quickly. Th e headset enters the pairing process.
3
Turning Bluetooth transmitting device to pairing standby
mode.
See the operating instructions supplied with the Bluetooth transmitting
device.
Th e list of detected devices appears on the display of the
Bluetooth transmitting device.
Th e headset is displayed as "DR-BT22. "
Th is headset indicator status will vary as follows, and pairing is
established with the Bluetooth transmitting device.
Th e headset indicator fl ashes quickly: Pairing in process
Th e headset indicator fl ashes (at about 1-second intervals) when
responding to the Bluetooth transmitting device: Connectable
(Pairing successful)
Th e headset indicator fl ashes (at about 5-second intervals):
Connected
24 GB

